Tech. Page

Technical Support (c) Apycom


Click on the options below for technical support for each of our products. Mounting/Operating Instructions for Dogipot Pet Station Mounting/Operating Instructions for Dogipot Dogvalet Poly Container Mounting/Operating Instructions for Dogipot Container Mounting/Operating Instructions for Dogipot Junior
Mounting/Operating Instructions for Dogipot Pet Station Your DOGIPOT Pet Station package includes: Packed in Waste Receptacle Box: Aluminum Pet Sign, 18" x 11½ DOGIPOT Junior Bag Dispenser, incl. 2 keys and 2 screws, locknuts, and washers Two Litter Bag/Rolls @ 200 Bags, installed in dispenser 10 Gallon Steel Waste Receptacle with retainer bands Roll @ 50 DOGIPOT Trash Liner Bags One 2˝ " and one 2ž " screws, locknuts, washers for the waste receptacle, (two 2ź " screws for your sign) 4'-8' galvanized telescope steel post, with 2 carriage bolts, washers and locknuts, (packed in a separate shipping box) Please check the above inventory first and call distributor if parts are missing. Select a good visible spot in your community / park where you want to install the DOGIPOT Pet Station. Insert the larger (2 sq.") 4' galvanized steel Post 14 inches into a concrete foundation, using one 40 lbs. bag of "ready to use" concrete mix . Level the post in a straight vertical position and let concrete dry for at least 12 hours. After the concrete base is dry, insert the smaller (1ž sq.") 4' galvanized steel post into the larger post, until 4 holes are lined up between the two posts. Use the 2 carriage bolts, washers and locknuts to fix the telescope post in position, the upper bolt in the top overlapping hole, pointing from right to left and the lower bolt 4 holes below, pointing from front to back. The total height above ground with both post parts should now be 6˝ '. Start by installing your Pet Sign on top of the post, upper hole matching the most upper hole in the square post using the enclosed 2¼" screws, washers and locknuts. Continue installing your DOGIPOT Bag Dispenser according to mounting instruction enclosed with Dispenser; the upper edge of the dispenser approx. 1"below the lower edge of the Pet Sign. Install the steel waste receptacle through the pre drilled, oval holes in the back wall of the receptacle and through the square post with the remaining screws, washers, and locknuts, the 2ž " bolt on top, the 2˝ " bolt below. The upper edge of the waste receptacle must be approx. 12˝ " below the lower end of your DOGIPOT Junior Dispenser. The upper back wall of the waste receptacle is suppose to touch the head of the lower carriage bolt, which is creating some space between the post and the receptacle for future installation of the accessory lid. Insert one of the enclosed (50) DOGIPOT trash liner bags into the waste receptacle (fold over retainer band). ENJOY WATCHING PET OWNERS PICKING UP AFTER THEIR PETS!

Back to the Top Mounting/Operating Instructions for Dogipot Container Select a spot in your environment (soft ground), where you want to place the DOGIPOT container. Dig a hole 7"x 7" wide and approximately 12" deep in to the soft ground. Fill the hole all the way to the surface with one 40 lb. bag of ready to use concrete mix . Stick the Standard Pillar into the wet concrete up to the marker, Mounting Plate up. Let concrete dry for approximately 12 hours, until concrete is solid and Pillar stands safe. Slide DOGIPOT container over Pillar, match holes in mounting plate with holes in container body and secure with 5/16-18 x 1½" screws, using a ½" wrench.
	IMPORTANT! * Concrete base must be leveled horizontally to 7" x 7" * Pillar must stick out 10½" above ground base and be leveled vertically
Maintenance Instructions When replacing the bag/rolls, be sure the bags will be dispensed following the outer wall of the dispenser box. This provides better tension when tearing-off the bags. The bag printing "DOGIPOT" will then be visible on top.

Back to the Top
Mounting/Operating Instructions for Dogipot Dogvalet Poly Container Your DOGIPOT DOGVALET Container package includes: DOGIPOT Poly Container, forest green or sand beige, with cam lock 2 keys for cam lock (same key fits all DOGIPOT dispenser items) 2 bag/rolls @ 200 bags, installed in container lid (bag dispenser) 1 box @ 50 heavy duty drawtape trash liner bags 2 ea. 5/16" x 3" screws, locknuts, washers 4' galvanized steel post (packed in separate shipping box) Please check the above inventory first and call your Distributor if parts are missing! Select a good visible (soft ground) spot in your community / park where you want to install the DOGIPOT DOGVALET. Dig a 7" x 7" wide hole, approx. 18" deep into the soft ground. Insert the 4' galvanized steel post 18" into a concrete foundation, using one 40 lbs. bag of "ready to use concrete mix". Level the post in straight vertical position and let concrete dry for at least 12 hours. After concrete base is dry, post should be sturdy and sticking out 30" above ground. Slide the DOGIPOT DOGVALET's back wall 2"x2" sinking into the top of the post. Use the two 3" screws, washers and locknuts to fasten the post to the container through the predrilled holes inside the container body. To match the post holes with the predrilled container holes, just wiggle the container slightly up and town the post until the screw finds the post holes. Insert one of the enclosed (50) DOGIPOT trash liner bags into the container body (fold over the upper edge of the container). To replace the pick up bag rolls, pull out the empty box, remove the diamond shaped perforated tab from a new bag/roll box and push box in place on the lid shelf so the lid dispenser opening matches with the box opening and the lettering on the box is NOT upside down.(See center picture) Close the lid and pull the first bag out by finding the raw edge of the first bag through the dispenser opening. ENJOY WATCHING PET OWNERS PICKING UP AFTER THEIR PETS!

Back to the Top
Mounting/Operating Instructions for Dogipot Junior Dispenser Mounting Instructions Remove the two keys from the back of the Dispenser. To open the front panel, turn the universal cam lock key one quarter to the right or left, pull the lower part of the front panel approximately 2" towards you and lift to release and separate the two parts. Select a good visible spot in your community/park, where you want to place the DOGIPOT Junior (house wall, tree, fence post, street sign post, etc.) The Dispenser has two pre-drilled holes through the ¼" stand off in the back wall. These two holes and the mounting screws included in the package do match with the holes of every common standard channel post (see picture). The recommended high above ground to the top of the DOGIPOT JUNIOR Dispenser should be approximately 66 inches.

Operating/Maintenance Instructions To fill the DOGIPOT JUNIOR with DOGIPOT Litter Bags, take two 200 bag/roll boxes, tear off the perforated seal on each box and place the two boxes above each other on the shelf with the opening of the boxes facing the front. Close the front panel and lock with the cam lock key. Reach through the two openings and find the raw edge of the first bag through each of the slots and pull until the DOGIPOT logo is visible. ENJOY WATCHING PET OWNERS PICKING UP AFTER THEIR PETS.
Back to the Top
The contents of this site are copyright© 2002, Dogipot, Inc.. All Rights Reserved.